The most people cannot determine garbage from the useful thing. They would instead throw away broken pallets than doing something useful with them. There are lots of woodworking projects that you can check online, but we decided to present you how to build a bike rack from pallets.
It is maybe the most convenient use of pallets when you don’t need them anymore, and you have no idea what to do with them. If you don’t have bike stand or rack for keeping your bikes organized, then the best solution for you is to build one using pallets.
This particular project is elementary, and it doesn’t matter whether you have kid bikes or bigger ones (or both). You have to understand that most pallets fit regular bike wheel size. Even small scooters can perfectly fit on the rack.
You may need to do some modifications, of course, that depends on the type of pallet and bikes you have. However, this will be a simple and quick project that you can finish in a matter of hours. Therefore, we decided to present you thorough tutorial.
- Vinyl Numbers
- 3 Pallets
- The table saws
The process of Building:
First, you have to find all tools that we have mentioned above so that you can start. It is essential to have three pallets on your side because you have to create vertical and horizontal part of the rack.
You should use the first one as the vertical part of the rack. It is crucial to find a bigger frame for upright one so that it can hold wheels of all sizes.
Other two pallets are indispensable for the next part. Place them upright so that they can hold bike better, while other should go upside down, and we will discuss why in the next step.
For the pallet that is on the ground, the idea is to create more wiggle-room so that you can line wheels that will fit in vertical racks. You can do this by setting the one rack board-down.
As you can see, this will provide you perfect solution for all wheels, and also cross-brace will help you stop without keeping wheels from rolling out.
It is essential that you put the bottom pallet apart from the wall because that will give the right angle for the top pallet to lean against it.
Most people concern themselves whether splinters would damage bicycle tires. You don’t have to worry about that because bike tire rubber is sturdy enough and pallet boards are not.
However, in case that you want to make it perfectly safe, then you should file rough spots for additional clarity.
Some of the woodworking tools could help you clear the possibility of any harmful thing that could happen to your bike.
It is just caution, so really you don’t have to do it because you will not be able to hurt rubber. But if that will clear your mind and stop you from worrying, try to do anything that will provide you better safety.
Lean it against the wall, so that vertical pallet is the closest, but the horizontal one shouldn’t be next to it so that you can keep it intact. Try to place the bike inside to see whether something is wrong.
Have in mind that you can easily modify it by any means, or create another rack with a smaller pallet for your children.
It is most straightforward and the most convenient DIY project that will take you only a few hours and you will get useful part of your household.
We have presented you a complete guide on how to build a bike rack from pallets. You can use lots of tools such as the miter saws but have in mind that this project will take you few hours. So you don’t have to worry that much.
Finally, you can paint it according to your style and preferences, in case that you want to make it match with other parts of the house or your bikes. There are endless possibilities when you finish it. If you are satisfied with this guideline, just share it with your friends and comment below.